|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PURM-320 air plasma metal cutting device presently is the most powerful device with air-cooled plasmatron to be produced worldwide. The device is designed to cut out any metals and alloys with gage of up to 80 mm.
PURM-320 device can be used in field working conditions (including Far North) virtually with temperatures from -30C to +40C and high humidity. Presence of two operating modes (half and full power) allows to save energy.
The opportunity to extend the cable-hose toolkit up to 20 m considerably increases working zone of the device.
|
Technical features of plasma cutting device"PURM-320"
| № |
Feature |
Measurement unit |
Value |
| I mode |
II mode |
| 1 |
Characteristics of electricity supply network |
3 phase |
380V, 50Hz |
| 2 |
Maximum power consumed |
kW |
48 |
| 3 |
Voltage of idling |
V, does not exceed |
280 |
| 4 |
Rated working current |
A |
140 |
280 |
| 5 |
Maximum working current |
A |
160 |
320 |
| 6 |
Air consumption |
l/min |
500 |
| 7 |
Air pressure, not less that |
áÔÍ. |
4,0 |
5,5 |
| 8 |
Cooling of plasmatron |
- |
air |
| 9 |
Operating mode with rated current, duty cycle |
% |
100 |
60 |
| 10 |
Maximum gage of handled metal (steel) |
ÍÍ |
45 |
80 |
| 11 |
Overall dimensions of power supply |
mm |
620È560È980 |
| 12 |
Weight of power supply |
kg |
255 |
| 13 |
Cutter weight in assemblage with plasmatron |
kg |
0,75 |
| 14 |
Overall dimensions of the set in packing |
mm |
640x680x1300 |
| 15 |
Weight of the set in packing |
kg |
300 |
|
|
|
