|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PURM-180MA air plasma metal cutting device is designed to cut any metals and alloys with gage of up to 50 mm.
Unlike PURM-180M model its power supply has fine current adjustment system in the range of 70...150A with stabilization of +/- 2.5%, which allows to get high-quality cutting and use PURM-180MA in thermal cutting machines, including those with numeric program control. Adjustment of cutting current is possible during working period.
100% duty cycle applies to all range of gages.
|
Technical features of plasma cutting device"PURM-180MA"
| № |
Feature |
Measurement unit |
Value |
| 1 |
Characteristics of electricity supply network |
3 phase |
380V, 50Hz |
| 2 |
Maximum power consumed |
kW |
30 |
| 3 |
Voltage of idling |
V, does not exceed |
300 |
| 4 |
Maximum working current |
A |
180 |
| 5 |
Range of current adjustment |
A |
70..150 |
| 6 |
Air consumption |
l/min |
500 |
| 7 |
Air pressure, not less that |
atm. |
5 |
| 8 |
Operating mode with rated current, duty cycle |
% |
100 |
| 9 |
Maximum gage of handled metal (steel) |
mm |
56 |
| 10 |
Overall dimensions of power supply (length-width-height) |
mm |
620x560x980 |
| 11 |
Weight of power supply |
kg |
240 |
| 12 |
Cutter weight in assemblage with plasmatron |
kg |
0,75 |
| 13 |
Overall dimensions of the set in packing |
mm |
640x680x1300 |
| 14 |
Weight of the set in packing |
kg |
280 |
|
|
|
