|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
PURM-160 air plasma metal cutting device is designed to cut any metals and alloys with gage of up to 50 mm.
PURM-160 device can be used in field working conditions (including Far North) virtually with temperatures from -30C to +40C and high humidity. Small weight of power supply (155kg) for PURM-160 device allows to move it easily around the area.
The opportunity to extend the cable-hose toolkit up to 30 m considerably increases working zone of the device.
100% duty cycle applies to all range of gages.
|
Technical features of plasma cutting device"PURM-160"
| № |
Feature |
Measurement unit |
Value |
| 1 |
Characteristics of electricity supply network |
3 phase |
380V, 50Hz |
| 2 |
Maximum power consumed |
kW |
24 |
| 3 |
Voltage of idling |
V, does not exceed |
280 |
| 4 |
Maximum working current |
A |
160 |
| 5 |
Rated working current |
A |
140 |
| 6 |
Air consumption |
l/min |
500 |
| 7 |
Air pressure, not less that |
atm. |
4 |
| 8 |
Operating mode with rated current, duty cycle |
% |
100 |
| 9 |
Maximum gage of handled metal (steel) |
mm |
50 |
| 10 |
Overall dimensions of power supply (length-width-height) |
mm |
350x550x1035 |
| 11 |
Weight of power supply |
kg |
155 |
| 12 |
Cutter weight in assemblage with plasmatron |
kg |
0,75 |
| 13 |
Overall dimensions of the set in packing |
mm |
1150x680x580 |
| 14 |
Weight of the set in packing |
kg |
190 |
|
|
|
